Fuse Box/Fuse board - supply and fit | Page 5 | on ElectriciansForums

Discuss Fuse Box/Fuse board - supply and fit in the The Welcome Forum area at ElectriciansForums.net

If you've asked a question in here chances are you instinctively feel something is nit right with what you're being told. It might be he wants too make a bigger job of it but also might be he doesn't want the job & is trying to put you off.
I would get someone else in & trust your instincts regarding what they say. I have found some excellent people through checkatrade.

Just my 2 p worth!

If you do get CU replaced get one with spare spaces for the future.

Cheers
Richard
 
Den,

I would advise you to get the EICR done first. If your existing c/u is non-compliant with BS7671, the EICR will detail this. I believe that an EICR should be done after a new C/U is fitted any way.

Cheers

Les
 
Den,

I would advise you to get the EICR done first. If your existing c/u is non-compliant with BS7671, the EICR will detail this. I believe that an EICR should be done after a new C/U is fitted any way.

Cheers

Les
I reckon if you are that worried about your electrics, an EICR would be best done prior to any work, don't you?
 
or at least a basic test/inspection to determine:
1. is a replacement CU advisable.
2. is the installation in good enough state to connect to a new CU with RCD protection etc.
 
or at least a basic test/inspection to determine:
1. is a replacement CU advisable.
2. is the installation in good enough state to connect to a new CU with RCD protection etc.
Yeah right on Dude, I mean Tel been watching some 60s carp on the telly Man far out.
 
Nice feedbacks.
  1. First the client house could be in a farm where service are TT and they requires that size RCD to protect the earth. "Just playing devil advocate".
  2. An EICR is required after change of of CU, will the ÂŁ350 include EICR, supply and install or will inspection and testing will be invoiced differently?
 

Reply to Fuse Box/Fuse board - supply and fit in the The Welcome Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
279
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
776
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
789

Similar threads

There's a difference between being required to install an RCD and being required to have a full rewire when all the houses around have similar...
2
Replies
19
Views
1K
If you look up the Anstoss ZIG2 igniters there are different versions, but either mains voltage, or 300V dc which produce 20kHz output, so I don't...
2
Replies
27
Views
1K

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top