I would post this in the trainee forum but I havent been accepted yet | Page 2 | on ElectriciansForums

Discuss I would post this in the trainee forum but I havent been accepted yet in the UK Electrical Forum area at ElectriciansForums.net

L

lofts

so I will fire away.


Im working on a house at the moment that has 2 rings. one up and one down. the one downstairs has the kitchen on it so I am going to put a new kitchen ring in which will leave three rings in total. upstairs ring,downstairs ring and kitchen ring. as the kitchen ring is one the downstairs ring currently I obviously need to joing the cables that were done so via the sockets previously so it remains a ring as such. I was going to use Junction boxes but I was wondering if I could use these instead

LINE 32A 3 Port Push In Connector [L3P32] - ÂŁ0.14 : for electricians by electricians


Live ------------ -------------- Live
Earth ----------- -------------- Earth
Neutral --------- -------------- Neutral

would I just connect one to each end of the cable making sure each one is put in the same or .......


thanks for any help
 
[ElectriciansForums.net] I would post this in the trainee forum but I havent been accepted yet

10 char
 
I reacted but I'm not going to do that anymore. Cheers to everyone who's helped out. Cheers to tel as well although he now seems to have the hump with me

ain't got the hump mate, just my sense of humour. if you last in the trade, you'll grow a thicker skin. treat the forum a bit like a site cabin. we all had to take the banter. you get used to it.
 
Come on guys, what’s going on, Lofty/Lofts still manages to get “how to do it myself” info on her, please stop giving advices.


I know some of you think that better to give advice then let him do it dangerous job, this has to stop, and the best way achieving this is to let him do it his way and mess it up
BADLY, maybe then we will get some changes in this trade, because we all know that changes come if something badly happens only, and maybe then he will learn, because he is obviously not listening what are we/were trying to say here, he called himself determined under previous name, I would call it deluded.

He is not in his own house or working with someone to supervise him; he is in the client’s house who trusts the so called electrician on his expertise, and assumes that he done and left everything safe, it just making me sick only by writing this, poor customers. The safety and well being of our customers must be a paramount issue to as all.



Don’t you see what is going on here; he somehow managed to get a well paid job, through lies and most probably through contacts. Portrays himself as top electrician and then rides on forum members heads, gets the answers and does the job, but don’t forget the job is still will be dangerous, think how many questions he didn’t ask.



He is not even has access to trainees section jet I think, because I seen the requirements to sign in, and I understand why he is not allowed; probably he has to produce something he hasn’t.



I don’t know why all this c**p got me going, because I believed before and still believe that this is a joke and someone under his previous name and the one now just taking a Mickey here……



Sorry for being harsh and if I offended someone, but I couldn’t hold anymore, because whenever I was coming to forum I seen Lofty everywhere, now I see Lofts. I understand that some of you like to get popcorns or can of bear, sit and enjoy the show, but this is seriously dangerous what he is doing ….



P.S. Members who knew him under his previous name Lofty, will have a clue what I am rumbling on about here.



Regards: Al
 
Last edited:
the best way achieving this is to let him do it his way and mess it up BADLY, maybe then we will get some changes in this trade
Regards: Al

I agree with most of your post except the above. I would rather help a man that is stuck, regardless of profession, age, ability etc. It's just being fair albeit he does drag his heels and doesn't help himself at times. Such is life.

P.S I do love a can of bear, but I couldn't eat a whole one, I prefer more conventional foods like chicken, don't you think the horse meat scandal was enough for the time being :)
 
I agree with most of your post except the above. I would rather help a man that is stuck, regardless of profession, age, ability etc. It's just being fair albeit he does drag his heels and doesn't help himself at times. Such is life.

P.S I do love a can of bear, but I couldn't eat a whole one, I prefer more conventional foods like chicken, don't you think the horse meat scandal was enough for the time being :)


Yes you right, as soon as posted I realized that that was over the top, agree with that, its just I wrote what I felt at that moment when i realized he is back.... To everyone to acknowledge- I DONT WANT ANY BAD ACCIDENTS TO HAPPEN WITH ANYONES WORK.

Regards: Al
 
Going back to the OP for a minute. Can you confirm why you are creating a third ring circuit in this house. I'm just interested in the justification for this? Daz
 

Reply to I would post this in the trainee forum but I havent been accepted yet in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
323
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
851
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
973

Similar threads

  • Question
I have to agree with Baldelectrician on almost everything he says except one ! I wouldn’t be walking away I’d be running lol. Definitely if your...
Replies
13
Views
2K
  • Question
Why aren't you asking them?
Replies
5
Views
860

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top