Thoughts

[Poult12]

My college course required me to do this. Any thoughts?

FP200 has a bend in due to the position if the gland.

 

[Pete999]

Not nice

 

[telectrix]

do the pyro and the grey cable so the bends match the pvc tube to the left. do the swa dead straight. bend the fp200 close to the bottom.

and don't power up with those open cables plugged in.

 

[Sintra]

Not very good at all.

 

[High Tower]

I've seem better tbh

 

[ipf]

Bit of an eyesore, to say the least.

 

[MDJ]

My college course required me to do this. Any thoughts?

FP200 has a bend in due to the position if the gland.

Is it A 5 Week course?

 

[High Tower]

Don't be too disheartened, it's not a bad attempt, in the real world you would have more room to make a neater job of it.

 

[mechelec]

Plugs with flex cut = very dangerous especially with people who do not understand the dangers around.

 

[dazza1981]

Few more cleats on that swa i reckon or it may fall off the wall

 

[Plonker 3]

Why do they expect you to do that?

surely asking you to dress in cables neatly and correctly terminated would be a lot better?

 

[MDJ]

Respect to the OP for at least posting up the picture, being serious I would say it is a bit messy, the conduit needs an extra saddle and there is too many cleats on the armoured and armoured flex , the pyro is tatty as well, however as High Tower mentioned in the real world you would have more room to make it a lot neater, and straighter, well done for posting though fella.

 

[Knobhead]

Is that it!

Dear God ! ! ! !

 

[ipf]

Lead wipe next on the to do list?

 

[Plonker 3]

Not the OPs fault he has to do it, these training centres have a lot to answer for making them do it.