Using terminal blocks within a CU | Page 5 | on ElectriciansForums
Click here to remove these ads

Using terminal blocks within a CU

Discuss Using terminal blocks within a CU in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Reply to Using terminal blocks within a CU in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Similar threads

woodster92
Help with Reg 551.7.2 Ina >= In + Ig(s) on 3 Phase Supply
Just stick the 63amp fused connector before the Henley block , or Lucy block as you call it, and your all good, as for your 2nd point, , the...
Replies
1
Views
783
Upton Sparks
Upton Sparks
T
Is there any advantage to installing a ground rod instead of the combined earth to neutral in my CU
Hi Mainline and thanks for the reply. My inverter is only fed from the mains supply over a 4 hour period at night and it does not have any tie...
Replies
8
Views
2K
Tonyboy
T

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top