Wet Locations | Page 5 | on ElectriciansForums

Discuss Wet Locations in the UK Electrical Forum area at ElectriciansForums.net

Cookie

-
Joined
Jul 11, 2019
Messages
675
Reaction score
126
Location
Earth
In wet locations a body resistance of 200 ohms is assumed, and disconnection times go down to 0.2 seconds in a 230 volts supply (0.4 110 volt supply), is that correct? Or is this not required in BS7671?
 
There is no rationale for the 3 meter rule.
I suspect it comes from typical lamp/heater/hair-dryer cable length and how far one might reach while just within a bath.

But I agree it is a bit far considering now such sockets would at least have to have RCD protection (as for outdoor locations).
 
This is precisely what happens. A large percentage of our newer customers are foreigners who are perplexed that they cannot use their hairdryer in the bathroom. They have spent a lifetime doing it safely in their own countries. Their next step is to buy an extension lead and plug it into the hallsocket.


Thats my point, bath sockets all over the world, including in the litigation driven USA.
 
Depends how sensitive they are and how strong their heart is etc. Plus the reaction of the shock may make people fall or bang their head. Just a few examples.

The point being I wouldn't want a 13A socket near the bath even if it was fed by an RCD. An RCD is not an excuse to allow potentially dangerous things to be done.


How would a listed hair dryer be dangerous when its double insulated? Having an outlet by the sink and within two feet of the shower is common and no one I know has ever gotten hurt. A typical example:

[ElectriciansForums.net] Wet Locations


[ElectriciansForums.net] Wet Locations


[ElectriciansForums.net] Wet Locations
 
How would a listed hair dryer be dangerous when its double insulated? Having an outlet by the sink and within two feet of the shower is common and no one I know has ever gotten hurt. A typical example:

View attachment 85664

View attachment 85665

View attachment 85668

Double insulation means it is safe for normal use. It's not a magic bullet, and doesn't mean a device is suitable for damp locations.

Mains powered electric drills have been double insulated for decades, but they shouldn't necessarily be used when it's raining.

Double insulation is not a substitute for a suitable IP rating.
 
Double insulation means it is safe for normal use. It's not a magic bullet, and doesn't mean a device is suitable for damp locations.

Mains powered electric drills have been double insulated for decades, but they shouldn't necessarily be used when it's raining.

Double insulation is not a substitute for a suitable IP rating.


Are wet hands really going to bring voltage out of the dryer or drill?
 
All discussions in this thread up to now have been for conventional bathrooms.
701:555.05. "where a prefabricated shower cabinet is installed in a room other than a bath or shower room, any wall switch and any socket outlet shall be at a distance of at least 0.6 mts from the door opening of the shower or cabinet"
This reg is almost certainly "copied and pasted" from the UK. Its intention was to facilitate the likes of budget hotels that don't have the space to conform to the regs. It allows contractors dealing with unconventional domestic installs to assist customers with creative solutions.
 
How would a listed hair dryer be dangerous when its double insulated? Having an outlet by the sink and within two feet of the shower is common and no one I know has ever gotten hurt. A typical example:
You are correct. The situation you describe is perfectly safe........ in America (Europe, Aus., etc) The issue with this scenario in the UK appears to be largely cultural, not electrical. On a previous post on the same subject the general feeling of electricians on the forum was one of not having confidence that the general public would adhere to safety guidelines regarding use of sockets in bathrooms.
 
On a previous post on the same subject the general feeling of electricians on the forum was one of not having confidence that the general public would adhere to safety guidelines regarding use of sockets in bathrooms.
You have seen who the British public voted in, haven't you?
 
You are correct. The situation you describe is perfectly safe........ in America (Europe, Aus., etc) The issue with this scenario in the UK appears to be largely cultural, not electrical. On a previous post on the same subject the general feeling of electricians on the forum was one of not having confidence that the general public would adhere to safety guidelines regarding use of sockets in bathrooms.

I'd argue the UK public is among the most educated on earth. If given listed appliances with a note "do no use in shower or bathtub" I'd trust everyone would follow through. At least they do in the US.
 
I'd argue the UK public is among the most educated on earth. If given listed appliances with a note "do no use in shower or bathtub" I'd trust everyone would follow through. At least they do in the US.

Don't underestimate people's capacity for stupidity in the UK.

Google will return plenty of news stories about people in the UK, who managed to electrocute themselves in the bath. Maybe better education would prevent this, but it's fairly common knowledge that using mains powered electrical items in the bath is a very bad idea.
 
I'd argue the UK public is among the most educated on earth. If given listed appliances with a note "do no use in shower or bathtub" I'd trust everyone would follow through. At least they do in the US.
I agree. I,m also a little perplexed as the UK generally tends towards good order and pragmatism
 
Don't underestimate people's capacity for stupidity in the UK.
Maybe better education would prevent this, but it's fairly common knowledge that using mains powered electrical items in the bath is a very bad idea.
That being the case, my real concern would not be the bathroom but rather the hot tub. While a shower is a hygienic occasion the hot tub is a social one, often involving alcohol. If a culture of safety can't be achieved in the bathroom it could well be a major issue in the hot tub down the road
 

Reply to Wet Locations in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
295
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
802
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
838

Similar threads

  • Question
That's brilliant Dave, thanks again. I had to raid my sons felt tips and pencils for any colours available! Apologies for the strange and...
2
Replies
24
Views
4K
  • Question
much more information required. Is the supply to the first building a DNO supply or a sub main cable from another building ? if it is a sub main...
Replies
5
Views
947

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top