Hi Jason i have pulled the cooker circuit back from the otherside of the kitchen and put a ccu on ready then the cooker comes with a plug on so customer thinks just bang it in a socket:eek: i say no it still needs to be on its own supply to prevent overloading the ring. Sounds as if i made the...
Customer wants to plug his new oven into the kitchen ring i said that it still needed to be on its own supply even though its on a plug. What do you all thinl ?
Cheers :)
My NIC man said if the room has a window you can isolate the whole lighting circuit and still see to work on the fan with the light from the window (that is if there is a break in the clouds) so he says.:confused:
Regards Haj
Great if you are just doing terminatoins ie stripping short ends but they lack a large enough cutting area for cutting whole cable but i find them good for the above.:)
Thanks guys can ijust say that there is a lot of FP in view as all the lighting is done in it and my cable route is under floor boards so not visible. cheers
Hi Guys
I have been asked to fit a socket in a church ( spurred from another one) Customer sai d she has had another quote stating that it must be in MICC very expensive !! I see no reason why it cant be done in FP200or similar. Anybody out there think any different ...
Hi i think you will find drilling roof joists is a BIG NO NO :eek: check out building regs book. If i am wrong someone will soon correct me !! ok as i said someone would correct me i knew you could not drill one of them ; Rafters i stand corrected
Hi guys
Loft conversion requires s/o and lighting so extending upstaires ring and lighting i think 2 MW certs will suffice so no part P required. What says you ?
Cheers :)
Hi
I had the same problem so moved it outside by a long ext lead and signal went right up so outside it went i think is something to do with the roof felt stopping the signal.
Good luck :)
Thanks gentlemen as far as pulling the cut out as said earlier JUST DO IT we need to stay safe dont we:D 25mm & 16mm earth it is then !
I digress i have been asked to wire a loft conversion my questions are is it ok to extend the upstairs ring and lighting or should i take a couple of new direct...
Talking with a collegue today regarding meter tails.I went to look at a c/u change 80A main head on 16mm Tails i said should be 25mm but he said 16mm was ok 25mm for 100A main head. Whats the word out there with you good men ?
Cheers :)
Hi Guys
I am covering for my mate who is on his hols got a call from a caravan park he covers asking if i can change a dimmer in the clubhouse it works 9 wall lights, as its quite a ride away i wanted to take a dimmer with me if i could do we work on 100w per light ie 900w plus reserve ...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc