door | Page 5

door

  1. J

    Moving into Alarms, Door Access and CCTV

    Hello lads. Just want to ask how much learning is involved with moving into Alarms, CCTV an Door Access. I’ve done a lot of Fire for Protec Fire Detection, both addressable and Conventional, Vespa- Cirrus Pro, a little bit on PA systems etc. I basically have limited installation experience on...
  2. B

    Garage door wiring kit

    Hi, after some advice on garage door wiring, know someone who’s having an electric garage door fitted, I presume it’s just fitting a switched spur and then garage lads will do the rest?
  3. D

    Switch in brick wall door opening

    Hello All So the wife wants to put a switch in a patio door opening. Wall is a cavity wall. I couldn't see in section 7.3.2 of my onsite guide that it was expressly forbidden but equally I wouldn't know where the cable should be run to be compliant because the safe zone seems to assume the...
  4. Y

    Roller door not working

    Hi guys, I have a 3 phase roller door not working. These are my readings? L1-L2 418v L2-L3 419v L1-L3 415v L1-N 134v L2-N 255v L3-N 247v After checking L1 and Neutral I thought it was a neutral problem but why is it ok for L2 and L3?!?! Thanks
  5. J

    Replacement access door on SECTOR consumer unit

    Hi all, a couple of weeks ago I managed to smash to smithereens the transparent plastic access door/cover on my sector consumer unit, that's at the top of my stairs. I need to get a new door/cover to replace it. I know all C/U's now are metal, but I was wondering if anyone has an old one, or...
  6. C

    Gluing alarm cables to UPVC Window frames & Door architraves

    Hello All, I am hoping to find a recommendation from members for a small tube of adhesive that is suitable for gluing Burglar Alarm detector cables to UPVC Window frames and Door architraves. I don`t want to buy a Hot Glue gun and glue sticks as I only have 4 cables to run down quite detailed...
  7. S

    Advice on a door entry product to integrate with PAC system

    I am struggling to find a product on the market for this specific problem I have and thought its worth having a shot at asking here. I have a lot of experience working with PAC systems (networked and stand alone) as my company has many properties using door entry systems. I however need to...
  8. D

    Pyronix door sensor help

    Hi guys, hoping for a bit of help. I just installed a Pyronix Enforcer 10 alarm system. I've installed a contact sensor on the front door. I thought I had configured it correctly: the panel has learned it and then I've set it to '7' i.e., "last exit". Problem is that it works fine on exit, but...
  9. rustynails

    RCBO tripping next door RCBO

    Testing an RCD on one rfc upstairs tripped the upstairs and downstairs circuis, which was the RCBO next door to it. Turned off the power to all circuits tested downstairs RCBO on its own RCD failed 1x and 5x tests. Disconnected conductors from this RCBO tested RCD at the board worked ok. Put...
  10. HappyHippyDad

    What power rating would this garage door be?

    I have a roller garage door that my friend has fitted which i've noticed is connected to a socket to give it power, but then has a flood light attached to the control panel which is also connected to the lighting circuit. In other words you need to isolate sockets and lights to make sure the...
  11. R

    Security Roller Shutter Door Isolator

    Hi All I'm trying to find an isolator that will take a class 4 security padlock for a factories roller shutter door, this is to comply with their latest insurance assessment. Can anyone point me in the right direction please? The usual 16/32A rotary isolators do not have a big enough hole for...
  12. J

    Only 1 Fridge door tripping electrics help please

    Hi all Hotpoint American style fridge freezer model FFA40X keeps tripping the electrics not the lights when the left hand door is opened. It doesn’t do it if the ugh hand side door is opened. It trips if both doors are opened at the same time too. The fridge has been tested and all good. What...
  13. N

    lights come on when door opens solution?

    One of my clients has decided he wants this kind of set up, one for a cupboard and one for the garage. Ive tried steering him towards PIR but he not to keen on them. Does anybody know of a sleek solution to this problem? Ive searched on the internets but all of the switches ive found for this...
  14. J

    My main fuse box is right behind my front door

    Hi, I've just moved to a ground floor flat and my mains fuse box/circuit breaker box, which ever it's called, is right behind my front door at the top. I moved into the property as it is supposed to be adapted for disabled access as I have a medical condition but the wiring was done before I got...
  15. P

    Supplier for Bell Systems door entry system

    I am trying to find a supplier to supply a slightly customised Bell door entry system i.e. not exactly one of their standard kits. I used to deal directly with Bell whose sales dept is excellent but now they say they won't supply direct. I need a supplier who is at least capable of understanding...
  16. cliffed

    Door swing openers/nursing home bedrooms

    24v dc,would you cable these in 6 core alarm cable
  17. D

    Door entry system advice

    Doing a job at the moment and the client has asked as an extra whether I can fit a second phone handset in another room from the existing. The current setup is a speaker/mike outside, door release, and handset inside to talk/open door release. Handset has 5 wires connected. Is it ok to just loop...
  18. buzzlightyear

    some body bang on the door some body ring the bell

    having been to a hotel with a fault on a lights and open and close system on a circuit .I had fixed the fault in which was the lighting .and Elvis left the building. about 1 hour after me left the building . the customer rings up the entry will not work .well it work for going out back to...
  19. buzzlightyear

    Any body behind the door

    i had call today and a very good customer rings can you come quick .now you thinking with dirty minds .i told them i will try and hurry and get to you quick. Now this customer has a hotel So i knocks on the door .so the customer opens the main door and a load of timber propt up against the door...
  20. PaulBerkshire

    Car alarm new door pins fitting

    Hi, I have a van that has a factory alarm but i want to instal another with sensors in rear and louder siren. Firstly if i instal new door pins for new alarm is it ok to have two alarms? Secondly the alarm has the out put for the pins but does that go to them with no other cabling (pins look one...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top