sockets | Page 6

sockets

Recent contents View information Top users
  1. P

    Garage supply

    Hi there. So I put power into my garage but having a few issues. I've connected the SWA from a 32amp breaker in the main CU (See yellow arrow in picture) out to the garage CU which has a 16amp breaker for 5 sockets and 6amp for 2 LED Strip lights. I've earthed this at the garage CU. Plug sockets...
  2. S

    Sockets on a radial circuit

    Hi all, After some advice here to settle my mind, is there any regulations to limit the number of sockets on a 20A 2.5mm radial? Reading regulation 433.1 i know it states 50m² floor area, but i can't seem to find anything about the number of sockets? Or is it just the total load that...
  3. L

    Anyone used "S-Box" Kitchen worktop pop up sockets ?

    Design, Installation + Data - The S-Box - https://www.the-sbox.com/design-installation/ These things ! Trying to source a nice quality twin gang unit for a Island .
  4. J

    UK mcb tripping after new sockets

    hi all. A friend asked if i would look at his kitchen sockets as they would trip just the mcb now and then. i said ill look but thats it as he had a electrician install 3 spurs and add 1 socket on a radial circuit 16amp mcb and looks like 6mm t&e from mb for the circuit and looks like the combi...
  5. timhoward

    MICC cable and sockets

    Bit of advice please. Not too used to this stuff. In large old building, a couple of MICC radial circuits feeding a few sockets each. All tests pass, all RCD protected, very good Zs etc. Questions: chassis of metal consumer unit being used for CPC, no banjos/fly leads etc. It clearly works...
  6. C

    UK Sockets in dog parlour

    Going to be doing a dogs pamper salon. A wooden shed building appx 2m x 2m. They want sockets on a couple of walls, plus a shower to wash dogs. Big problem with 3m rule. Suggested under sink 7 litre water heater attached to shower hose. Does this still become a shower? Would I be able to use IP...
  7. B

    Sockets for commercial kitchen

    Which make of single socket would you recommend for a commercial kitchen with 3kW plug in fryers so they don’t melt?
  8. 1

    Adding Outside sockets to existing

    Hi all , I understand that you can’t spur of off a spur , ideally adding sockets would best be done by splitting the ring and completing it. Currently have an outside socket on the back of the house which won’t be used at all but we have a decking area further up the garden which I want to add 2...
  9. R

    New radial circuit to supply 2 double sockets on a 3 phase board

    So I'm back to work after the bank holiday and I've been asked to install a couple of sockets so they can plug this big beast of a ups system into it. Currently they have about 5 extension leads all linked to gather supplying it ? I've never worked on a three phase board before but I will...
  10. R

    Fitting Sockets.

    I guess you could file this under hints and tips. When you're installing a socket the worst part, for me at least, is pushing it into place and keeping it there while you tighten the screws. That means bending the cables, however many there are. It can be quite a feat of strength and and a bit...
  11. A

    Outdoor sockets

    I have run a cable plugged into my bedroom socket outlet into my garden and put an outdoor weather proof outlet in the garden, my landlord has told me I need a electricians certificate but I thought it was just like an extension lead. Any help would be fantastic.
  12. L

    Wall sockets in utility room not working but there is power to them Nothing has tripped fuses ok

    Sockets in utility room not working but power reading when checked with meter Consumer unit hasn’t tripped Lights ok
  13. W

    UK Legal Details - Sockets - Where is the requirement for separate socket earths to be linked?

    I have come across a double socket where the earth terminations aren't linked together - Is this illegal (and what regulation do i look at?) or is it allowed, and I just put the loop-earth in one termination and join the unearthed socket with a length of Earth conductor?
  14. B

    Sockets for a summer house

    My mate has built a summer house on to the side of his house. He wants to install two double sockets and a light. can we spur off the ring main( which is rcd. protected), with a 30 amp junction Box to a un switched fuse spur then two double sockets. am I right that if he wants to use a...
  15. timhoward

    13A sockets different phases

    Hi On Friday I found 2 x 13A double sockets about 30 cm apart in an office. One of them was on same circuit as all other sockets in same room. The 2nd one had been added, and drilled through from the adjacent office. The circuits are on different phases. Common sense dictates that a 400v...
  16. S

    Sockets tripping after board upgrade - should have been rewired

    After updating a consumer unit, from an old rewireable fuse board, one of the socket circuits is tripping when under load. The property should have been rewired as the installation is so dated but the project manager and client didn't want to rewire it. The supply to the flat is approximately...
  17. W

    Two single outdoor sockets into a double rcd socket

    I have two outdoor sockets(in poor condition) wired to two ground bedded armoured cables.The sockets are linked to one another via three wires(coloured live,neutral and earth).The sockets therefore have two wires in each terminal.I want to replace with double rcd socket.Can I join the bedded...
  18. D

    Oven with 13a plug top

    Been asked to fit new oven , which comes with a 13a plugtop , there is no socket close to plug into , if i cut plug off and connect into cooker unit connection behind cooker , do i have to adjust the 30a cooker unit fuse.
  19. T

    Best options for more temporary power sockets for office?

    I'm in need or around 20-30 power sockets for small electrical devices, less than 1amp each. At the moment I have a bunch of extension leads all running to the same 2 or 3 plug sockets, is this safe or should this be avoided? I have seen this cabinet type set up, which has 10 sockets inside...
  20. J

    Running sockets and lights outside

    Hi all, I've got a question and I'm not sure if anyone can help? I have recently built a gazebo and as part of the built I required sockets and lighting. As with these sorts of things the gazebo was no where near the main board. So firstly I already had an outside socket IP66 (not a spur)...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top