M

mattmoo1974

Lol he came in his test sheet was half filled in, Every thing was >200 Meg Ohms.
I asked how many he did a day he said 3-4. asked how much his company charge he said "You wont get much more the 80-90 quid for a PIR these days"
i live in a 3 bed house. He did in fairness put some g@y sleeving on some bare Cpc's.
1 light SWT came off 1 Double socket.
 
Lol he came in his test sheet was half filled in, Every thing was >200 Meg Ohms.
I asked how many he did a day he said 3-4. asked how much his company charge he said "You wont get much more the 80-90 quid for a PIR these days"
i live in a 3 bed house. He did in fairness put some g@y sleeving on some bare Cpc's.
1 light SWT came off 1 Double socket.

Was this a council job?

What tests did he actually do then?

How the hell can you do a PIR witout any IR tests?!?!?!?!?!

There is only one test that shows the quality and age of a wiring system and he didn't do it, it's just theft and fraud!!!!!
 
Housing Assosiation
Did Rcd trip times on cooker/up and down ring and upstairs lights. Oh and he did rN r1 r2 downstairs ring. I basicly think he did 90 quids worth :S
 
Last edited by a moderator:
Iv tested my house about 10 times in prep for my 2391 practical mate. Its just a joke what people will do and get away with.
Thing is i had a brand new Board fitted when i moved in, In august(crabtree all Rccbo's).
I got sent a letter saying they would be out, I then rang the company and told them about it being new.
The lady said it had to be done and should only take 30 mins to 1hr halfs hours. I thought she was just being dizzy and didnt have a clue about it all.
 
Regardless of whether you test the house etc etc. This bloke is going to other houses and saying they are fine when he has no idea if they are or not. There's taking shortcuts, there's cutting corners and there's just taking the mic. This bloke should be reported and shouldn't be doing any work of this manner.

I wouldn't mind £400 a day for doing jack, but unfortunately I don't think I could square it with my conscience.
 
I believe TonyS was offered a similar deal on PIR's but had the good grace to politely decline the offer!

How can you sleep doing that? Palpitations at the mere mention of a house fire...
 
There are many engineers and i mean MANY, that will happily do 3 or 4 pir's a day, everyday. I was asked to do the very same and refused, on the grounds that to do a test properly it is physically impossable doing 4 in one day, i was on the books then and nothing more was said because they knew deep down i was right. I think if the **** hit the fan by that i mean a dangerous fault missed then the company would have to take the responsability for the mistake, not 100% on this but im fairly sure. Mayb thats how they slept at night............
 
Last edited by a moderator:
Wev'e had the great pat testing scam....guess it was only a matter of time before PIR's started to go the same way......stick a label on the CU...off to the next one. All you need is a van full of labels:rolleyes:
 
surely the responsibility of the tester is to test the bloody installation. i couldnt sleep at night if i were doing 4 pirs a day lol. the possibility for major oversights is huge, and my name would be on the test sheet, no way.
 
I believe TonyS was offered a similar deal on PIR's but had the good grace to politely decline the offer!

How can you sleep doing that? Palpitations at the mere mention of a house fire...

Started off at £33.70 and then went up to £35.00 when I said "yer right". Good Money Ill say ha ha. Anyway that was through an Agency and I believe the company who were laying them on, may be in the jobs section on this site?

£125.00 - £150.00 is roughly what Local Authorities allow on decent homes projects. I worked on decent homes project for roughly 6 years for a Local Authority with an housing stock of roughly 9000. I knew the in and outs of the prices.

The work I done was direct to the Local Authority so once my mate took a little lump for the business there still a few quid left for me the other sparks and I would get extra because I was the fullscope Q.S.

A lot of money to be made on these projects if your first in line.
 
mickeytuff - when you say 'engineers' what do you mean? You have to have a minimum HNC qualification to be entitled to call yourself an Incorporated Engineer and Degree level for Chartered Engineer. There are too many peeps calling themselves 'Engineers' without the legal right to do so.

Sorry, rant over!
 
While a full PIR on a 3 bed property in 1 hour 10mins is simply not possible that is not to say that a useful inspection and test could not be carried out in that time. I reckon in that time (on an average 3 bed semi with no sheds etc) I could verify and test the main earth ,verify main bonding,check circuit protection devices were adequate and carry out a sample Zs test on each of the final circuits to verify disconnection times.I could also have a scout round for broken/damaged accessories.......but that would be it.
That would still be a very useful inspection and better than nothing at all.....as long as it was described as such.....but if it is described as a full PIR that is a joke...we all know how long these take to do thoroughly....I couldnt sleep at night either.
 
My mistake "Electricians" not engineers (just slapped my hand).......ow that hurt

Theres no "e" in mickytuff :p:p
 
Last edited by a moderator:
I asked how many he did a day he said 3-4. asked how much his company charge he said "You wont get much more the 80-90 quid for a PIR these days"

If the company charges £80 - £90 then I bet they slice and dice and leave about £35 for the tester. 4 x £35 = £140, wonder if that was my job :D:D:D

Just glad I'm back into commercial/industrial work, domestic work is bad news and all but finished imo.
 
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread Information

Title
Had a PIR done on my house today, Can ne 1 beat this Guy 1hr 10mins and gone?
Prefix
N/A
Forum
Australia
Start date
Last reply date
Replies
63
Unsolved
--

Advert

Thread statistics

Created
mattmoo1974,
Last reply from
MKS,
Replies
63
Views
7,730

Advert

Back
Top