Questions and electrical advice in the Periodic Inspection Reporting & Certification - This Section is STRICTLY for testing PROBLEMS which members have occured, misunderstood readings, Periodic Inspection Reporting / Electrical Installation Condition Reports, Mathematical Equations/Solutions, Part P and other legislation which require you to Inspect and Test..
Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs
Hey there, we have some new members posting in the Welcome forum, please head over there and say hi to a couple. Click here to visit the Welcome Forum (this will open in a new window). Thanks.
Normal Threads
Thanks for your replys guys. I do normally do...
I always think of the slogan on the old beer...
Rule of thumb? 2.5 T/E ring around hundred...
- brizospark
- 9
- 14K
OK, I am happy to do that. It's not the actual...
The difference between the 16th and the 17th...
- Jimmyb
- 12
- 3K
probably same ones as me!! did you get free...
IR test on Car park lights is a fail...
I would read Reg 433.1.5
Regards Chris
Stand alone RCD, not one in the board
Excellent, thanks v much accordfire for...
- riotmaster
- 3
- 7K
It depends on how you are testing.
If you are...
- bluesky
- 19
- 23K
ive had the same problems installing new DB's...
It's the difference between 'good practice'...
i think the megger software does this?
- tester11
- 1
- 2K
why would u leave an installation with 68.4...
the best way of doing insulation resistence...
never got used to these new fangled meters...
- dean.diy
- 3
- 2K
Only works when doing low resistance test ...
[/COLOR]
An RCBO
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Thermostat ProblemYour BDR91 doesn't seem to be behaving in the way I would expect, or I may have misunderstood...- Latest: Avo Mk8
-
MF 32-40a jointHi all, Just been on a kitchen remodel, has used the existing cooker feed due to difficulty of...- Latest: Yellowhammer
-
Help with light blowing breaker. Not newly fitted.Power off. Have a look behind switch… check for damage… Symptoms suggest a dead short either L...- Latest: littlespark
5 Popular Electricians Tools Thread
-
Automatic gyroscope laser levelAutomatic Gyroscopic Laser Level Do they all automatically stay level...- Started by Dan
- Replies: 37
-
UHF wiring helpMorning all, just after some help with some UFH wiring on my job im...
- Started by SparkDownSouth
- Replies: 5
-
Viper clip gunHello, has anyone bought or used the viperclip gun , it was the one on...
- Started by GB Electrics
- Replies: 18
-
Wire Strippershttps://www.amazon.co.uk/s?k=wire+strippers&crid=T5FZCQEYB3NL which...
- Started by Dan
- Replies: 15
-
Gas Powered Soldering IronI’m looking to buy a gas soldering iron for work as a kit. Would anyone...
- Started by RDB85
- Replies: 21
Some Popular Threads
-
Song words.I mentioned this a while back as a thread on another forum which has...- Started by westward10
- Replies: 799
-
Immersion fuse or MCB?An immersion heater 3kW, say off a final ring. A number of points. Is...
- Started by Steve-S
- Replies: 110
-
Unreasonably high invoice bill from an electricianGood afternoon everyone, I am Alex and I'm new here. I am posting this...- Started by AlexanderSmi123
- Replies: 96
-
RCBO installtion in old MCU following EICR ReportHi, I recently had an EICR done at my property which unfortunately was...
- Started by Deanp35
- Replies: 93
-
3 phase problem after spark did 5 year safety inspectionHi lads 5 year safety inspection the spark put the tails back and later...
- Started by jimthegent
- Replies: 81
-
It's with regret I have to inform you, Christina (Sparkychick) has passedIt's with regret I have to inform you that Christina, the Sparkychick...
- Started by Dan
- Replies: 79
-
UK Identifying live, neutral and earth in outdoor festoon lightingI bought some outdoor festoon lighting a few years ago and the 2 pin...
- Started by Richard Cook
- Replies: 68
-
After a New Consumer Unit, now I need EICR & 100A DP Isolation SwitchTrying to organise a CU replacement at home. It's a 1930s property...
- Started by i3_happy
- Replies: 65
-
Im testing some badges out.You may be awarded some but they will be taken away again so please...
- Started by Dan
- Replies: 63
-
Will you vote?So the general election upon us after a month of farcical campaigns by...
- Started by westward10
- Replies: 57
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.